AC-III™ The best looking bolt-on wheel made for Cobra replicas. We make both 1 and 2 piece wheels, the two-piece construction allows the offset to be varied in manufacturing by moving the center forward or backward before final welding. This allows you to order wheels that will position your tires perfectly in the fender wells. The finished wheel is very light-weight. Wheels are available in most five lug bolt patterns. 17 and 18" AC-III wheels Now avaliable in Pin Drive and Bolt-on, Please call for pin-drive backspacings. |
BUY THESE WHEELS
AC-III Specs & Pricing | |||||
Wheel Size | Photos | Front Side Setting min - max | Back Side Setting max* - min | Cast Price Each | Lip finish |
15 x 7 | 3 3/8 to 4 1/2" | 4 5/8” to 3 1/2” | $479 | POL | |
15 x 8 | 3 3/4" | 5 1/4" | na | POL | |
15 x 8 | 3 1/2 to 5 1/2" | 5 1/2 to 3 1/2" | $479 | POL | |
15 x 9 | 3 1/4 to 4 1/2" | 4 3/4 to 3 1/2" | $489 | POL | |
15 x 10 | 4 3/4 to 4 1/2" | 6 1/2 to 6 1/4" | $335 | POL | |
15 x 10 | 3 3/8 to 7 1/2" | 7 5/8 to 3 1/2" | $499 | POL | |
15 x 12 | 3 1/2 to 9" | 9 1/2 to 4" | $519 | POL | |
17 x 7 | 3 1/2 to 4 1/2" | 4 1/2 to 3 1/2” | $529 | POL | |
17X7 | 3 3/4 | 4 1/4" | $345 | POL | |
17 x 8 | 3 1/2 to 5 1/2" | 5 1/2 to 3 1/2" | $529 | POL | |
17 x 9 | 3 1/2 to 6 1/2" | 6 1/2 to 3 1/2" | $539 | POL | |
17 x 9 1/2 | 3 1/2 to 7" | 7 to 3 1/2" | $549 | POL | |
17 x 10 1/2 | 4 7/8" | 6 5/8" | $395 | POL | |
17 x 11 | 4 to 8 1/2" | 8 to 3 1/2" | $559 | POL | |
18 x 7 | 3 1/2" to 4 1/4" | 4 1/2" to 3 3/4" | $549 | POL | |
18 x 8 | 3 1/2" to 4 1/4" | 5 1/2" to 4 3/4" | $355 | POL | |
18 x 8 | 4 1/2" to 4 3/4" | 4 1/2"to 3 1/4" | $559 | POL | |
18 x 9 | 4 1/4" to 6 3/4" | 5 3/4 "to 3 1/4" | $559 | POL | |
18 x 9 1/2 | 3 " to 7 1/2" | 7 1/2" to 3 1/2" | $579 | POL | |
18 x10 | 3 " to 8" | 8" to 3 1/2" | $579 | POL | |
18 x 11 | 3 " to 9" | 9" to 3 1/2" | $629 | POL | |
18 x 12 HP | 10"- 5" | 3" - 8" | $639 | POL | |
18 x 12 LP | 9 3/8" - 4 3/8" | 3 5/8" - 8 5/8" | $639 | POL | |
Red, bold wheels are 1-piece cast and in stock.
Wheels require purchase ET Mags accessories to complete wheel,
2-piece wheels with large backspacing require special Flange Center machining at $65 each.
WHEEL ONLY, WITHOUT ACCESSORY PURCHASE, call for pricing
Decorative Knock Off Kit (polished): $360, set of 4.
Lug Nut Cover Kit (cast): $125/set of four.
Hex cap $45.00ea.
17" AND 18" Pin Drive wheels
Pin Drive KO wheels come with 5 on 4.5 or 4.75 PCD for T3 adapters and pins
Other pin patterns can be drilled $50.00 per wheel, if no tooling is needed.
Knock-off wheels are for "Racing purposes only".
Different center bore machining on wheels is subject to hub drawing and $75.00 ea. machining charge
All wheels have polished lip.
Some 2-piece wheels with large backspacing requires special flanged center machining at $45 each.
Satin finishing of Lip is $50 each.
2 piece wheels are assembled to order with a 1-3 week turnaround. Other sizes can be made, please call to discuss application
Prices effective april 15, 2022.
*CAUTION: Deep backside settings, more than 4", or Reversed profile 15" 2-piece wheels may not have a brake drum or caliper diameter larger than 13 1/8". See Tech Specs page.
CALIPER Clearance, these are maximum and may be less depending on wheel backspacing.
17" wheel has .9" max.,
18" wheel has 1.125" for HP
18" wheel has .5" for LP
*CAUTION: Deep backside settings, more than 4", or Reversed profile 15" 2-piece wheels may not have a brake drum or caliper diameter larger than 13 1/8". See Tech Specs page.
= See wheel on vehicle.=See photo comparison of wheel in different sizes.
BUY THESE WHEELS