K-80 Victoria | Krieghoff (2024)

Titanium – Options

• Titanium trigger, trigger group made of steel

Titanium – Options, Black

• Titanium trigger shoe, trigger group made of steel, matte black

Titanium – Options, Gold Plated

• Titanium trigger shoe, trigger group made of steel, gold plated

Matched Pairs

A Matched Pair of guns is possible. An up-charge of 10% is required with any order of a matching pair. This includes consecutive numbers and Stocks matching in color, figure and weight. Both guns are identically balanced.

Krieghoff Balance System

• The barrel can be provided with up to three additional 1.4 oz weights underneath the forend, thus making an increase of 4.2 oz at the front end possible.
• The buttstock can be equipped with a special stock bolt, which is 1.4 oz heavier than a standard stock bolt, and can accept up to three additional 1oz weights. Thus, making buttstock up to 4.4 oz heavier.

Gauge

• 12 Gauge (3″), chambers are chrome plated
• 20 Gauge (3″), chambers are chrome plated
• 28 Gauge (3″), chambers are chrome plated

Barrel length

• 28″ Krieghoff Thin Wall Chokes (12ga Only)
• 30″ Fixed M/IM, IM/F or Krieghoff Thin Wall Chokes
• 32″ Fixed M/IM, IM/F or Krieghoff Thin Wall Chokes
• 34″ Fixed M/IM, IM/F or Krieghoff Thin Wall Chokes (12ga Only)
• *K-80 28ga Parcours only available in 32″

Krieghoff Balance System – Barrel weight

The barrel can be provided with up to three additional 1.4 oz weights underneath the forend, this makes it possible to increase the weight of the barrel by the forend by 4.2 oz.

Barrel Porting

Available from the factory for 12 Gauge barrels to reduce felt recoil and muzzle jump.

Krieghoff HIVIZ Pro

High Visibility fiber optic optional shotgun sights are available with interchangeable fiber optic tubes in several colors.

Krieghoff Thin Wall Chokes

The new Krieghoff Thin Wall Chokes are available in the following constrictions and can be ordered in any of our Parcours platforms. Available in 12ga and 20ga.

Receiver finish options

• Nickel plated receiver finish. Nickel is our most durable finish option for a receiver. The nickel resists corrosion and provides a great finish for hard use. Nickel is not available in conjunction with Gold Plating.
• Blued receiver finish. The Krieghoff Blued finish is a deep black color. It provides a
• Nitrated receiver finish. A nitrated finish is common on heavily engraved guns, especially with gold inlays and custom engravings. The nitrated finish provides a coin-grey finish and is easy to maintain.
• Color case hardened finish. Color case hardening is one of the original gun finishes available for fine shotguns. With variations of blues, grays and straw colors the process makes a unique finish each time. Less durable than Nickel or Nitrated finishes we finalize the finish with a clear lacquer to provide an additional layer of protection.

Lock finish options

• Internal lock parts nickel plated
• Internal lock parts gold plated, triggers not included and must be specified
• Titanium trigger (including trigger group), gold plated
• Titanium trigger; trigger group made of steel; gold plated
• Titanium trigger; trigger group made of steel, black

Engraving options

• • Catalog Engravings
  • Custom Engravings

Woodstock category

• Standard Grade
• Category 001 (CAT001)
• Category 002 (CAT002)
• Category 003 (CAT003)
• Category 004 (CAT004)
• Category 005 (CAT005)
• Exhibition Grade or Custom
  • A custom fit stock is almost entirely hand made with only minimal pre-machining. A typical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request.

Exclusive wood categories as stock blanks (hand-crafted)

Due to the high cost of raw materials, wood grades higher than CAT005 often require a custom-made stock. The exclusive Exhibition stock blanks are limited. Therefore the availability cannot be guaranteed.

Left-handed stock

Left-handed stocks available.

Hand-crafted stock

• Custom made stock with ergonomic grip and finger grooves as well as an adjustable butt plate
• Buttstock with standard dimensions
• Buttstock with special dimensions, made to customer’s specifications
• Forearm with standard dimensions
• Forearm with special dimensions, made to customer’s specifications, beavertail or semi-beavertail forearm

Wood Stock Finish Options

• Satin Epoxy Spray Finish
• High Gloss Epoxy Spray Finish
• Open Pore Oil Finish is a matte oil-rubbed finish with open grain (Standard)
• Tru Oil Finish is a glossy oil-rubbed finish with closed pores & grain

Monogram plate

• Inlet into pistol grip cap
• Steel pistol grip cap fully covering

Monograms

• Two letters engraved
• Two letters engraved in relief style
• Two letters in silver
• Two letters in gold

Krieghoff Balance System – Stock weight for K-80

The buttstock can be equipped with a special stock bolt, which is 1.4 oz heavier than a standard stock bolt, and can accept up to three additional 1 oz weights.

Adjustable butt plate

Krieghoff Adjustable Butt Plate is available.

Note: Fitting may require removing up to 1/2″ of the buttstock to maintain the same LOP.

Length of pull adjustment options

The LOP on Victoria stocks can be adjusted by the Woodshop or by adding the Krieghoff Adjustable Butt Plate and pre-fitted spacers.